Question:
i have a 1978 bedford coach. 8 litre diesel.. the wheels are 11 x22 tryes. i need a step by step advice on how to remove the wheel drums to service the brake pads
Answers:
Why Can I Convert My Toyota Prius Hybrid To 250 MPG?
Why not join a preserved vehicle club.They have the knowledge and often the special tools you might need.
If you took it along to a club meet, you will find lots of willing helpers.
Kangoo Ex-British Gas Van.. Stereo problems?
most commercial vehicles have the brake drum and hub as an integral unit.obviously the vehicle has to be jacked up and the road wheels removed.note that the nearside-left side has left hand thread on the wheel nuts.to gain access to the brakes the hubs have to be removed if the drum is not separate from the hub .to remove the hubs-remove the grease retaining cap with a screwdriver remove any split pin or flatten any locking washer undo the bearing retaining nut remove the hub.refitting is the reversal of the procedure.be care full not to get any dirt onto the bearings and if the bearing is a tapered bearing tighten the retaining nut and then loosen the nut until it is making light contact on the bearing .do not over tighten this type of bearing.if the bearing is of the parallel type tighten fully.if the hubs are tight you might need a puller to remove themMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.