Question:
i think it is installed correctly, but its not firm on the back, only there where the babys behind is, the top i can move from right to left and left to right, sorry for the bad explanation, i am german
thanks
Answers:
2. Pass seatbelt through designated hole and pull tight
3. Place hands on both sides of the seat where bubs sits and push down against the seat
4. Lengthen anchor strap so it's longer than you need then attach to anchor bolt
5. Tighten strap as far as you can then pull the back of the seat forward and tighten a bit more
6. Push back of seat against the strap while pulling up the stabiliser bar making sure the seat is still flat on the car's seat.
7. repeat step 3
Where can I get a car sticker/decal made?
This should then be quite firm but there is ment to be a slight bit of movment in the top of the seat. Just make sure that there is atleast a 1-2cm space between the top of the seat and the front seat because if it touches, bubs seat is unable to do it's job properly if there is an accident. If you are still unsure then you can get RAC to check this for you (if you have them in your area).
Police or fire stations will check it for you.
You can take it to the local fire dept and they should be able to help you. If not you can ask someone at your doctors office to be sure
What gives gasoline its red color?
try your local police.Your local police station or fire station.
Did GOD REALLY put a lesson in every day . i try to figure out what he?
I work for my local Sheriff's Department. In my town each police agency has a few officers that are certified in child safety seat installation. You may want to call your local police agency and check on this. We usually have the person come to us somewhere so we can visually check out the seat and/or show you how to install it.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.