How much should a full 33 pound propane aluminum cylinder weigh?

Question:

Answers:

Can I get a job sailing boats from Germany/Holland to the Med?

Depending on the particular valve configuration (which can vary depending on usage), around 23.5 pounds will be the Tare weight (weight of the cylinder empty). This Tare weight should be stamped into the collar of the cylinder. 33 lbs. or more accurately 33.5 pounds refers only to the weight of the propane within the cylinder.

where submarines used in world war one?

As can be seen by many of the answers to this question the common misconception of the weight reference is often misconstrued as the total weight of the cylinder and the propane contained within it, when full.

pivots on the wheels?

In general most all aluminum cylinders from the most common manufacturers built to the DOT 4E240 specifications will weigh about the same, but keep in mind that there are a few odd cylinders out there and you should always check the Tare weight stamped on the cylinder.

If you throw a bar of steel in water?

Add the tare weight of the cylinder to the weight of the propane to get the total weight of the cylinder. For example 33.5 pounds of propane, plus a cylinder tare weight of 23.5 pounds would give a total weight of the filled cylinder of 57 pounds.

Marine Engine?

around 33 pounds

where do you register for cunard world club.?

The maximum level of fill in any tank should only amount to 80%

Can you tell me a sample boating experience that made you feel great or was special?

33lbs?

What are the names of the positions in the crew of a ship or a sailboat?

The weight of the original tank varies, so the full weight varies. You have to have the empty tank weighed and then fill it.

I have a 1980 thundercraft tri-haul 13' with a 70 hp evinrude motor changing from fresh to saltwater. to do?

if you already have the tank, have it filled then weigh it. all over 33# will be the weight of the tank.......duh!!

narrow boat?

i don't know