Question:
i mean supily wise.
Answers:
where can i buy the x catologue stuff from?
$15 max. kit at auto parts store. don't get it on you & there's no clean up.What is the best brand of marine batteries?
Depends on what you mean by "fiberglass." Are you covering an existing box in glass, or are you trying to fabricate an entire box out of glass?What caused the SS Edmund Fitzgerald to sink?
Re-covering an existing box would probably run about forty to fifty bucks, depending on what you already have lying around and whether you already have the box. You'll need fiberglass matting, resin and hardener. Find an old plastic container in which to mix your resin. Remove the speakers and glass away.
Creating a whole box out of glass is quite a bit different, as you'll have to build a wire or wood frame and then cover it with a substantial thickness of glass to get the durability required; subwoofers produce an understandable amount of vibration. You're probably around 250-300 bucks on this project, but the possibilities for creativity on the finished project may be worth it to you.
If you've never used glass before then this is probably a good project for you, since a speaker box won't have to be automobile-fender straight or boat-bottom waterproof. Have fun!
How difficult is it to convert a roller trailer to a bunk trailer for an 18 ft boat?
http://forums.evolutionm.net/archive/ind...View Full Version : Making a Custom Fiberglass Speaker Enclosure *Long Tutorial* 56k - go away!
AznFlip
On this project, I will make a rear speaker enclosure. But before you start on this kind of project, ask yourself first..... Do I have alot time to do this... Am I okay working messy? Becuse it took me about 2 weeks to build this because I didn't have time. Well it turn out really good though after all those hard work and patience.
I'm having a hard time getting to the impeller for a honda 9.9 xtra long shaft. How do I get to it?
Before you start you will need this following materials.
Materials
my boat gps system shows 44mph at full wack whats that in knots?
Fiberglass Mat & Cloth: under $30 ( 9 sq/ft (1 yard) packages. I used approximately 5 packages, around $5.50 each from Autozone)
Fiberglass Resin: approx $30 per gallon with hardener (Don't be cheap by getting a quart, because you will end up using more than that)
Brushes: $5 (Get the cheapest kind you can, as they will probably not be reused. I would recommend using regular bristle brushes. Get some of each if you want to experiment. Let’s say, 10 brushes @ 50 cents each. If you choose to try and save your brushes, put them in acetone immediately after use)
Masking Tape: under $10 (couple rolls is enough)
Mixing Sticks (Just like the paint jobs on Monster Garage, these are freebies)
MDF: about $10 (Medium Density Fiberboard, I used ½” and ¾” thick MDF for this project)
Wooden Dowels: under $5 (if necessary)
Wood Glue: $2.00 (Emler's wood glue is good enough, anything that makes something sticks together)
Fleece or other fabric: about $3 per yard ( purchased a polyester/cotton blend at a local fabric store. I got 3½ yards and make sure your material is stretchy and stay away from pure cotton, as it can shrink and wrinkle
how do i winterise a outboard motor?
The total for all materials is approximately $70.00
wat is the webpage for inquiring abt watercraft/seadoo license?
Optional Materials
Body Filler with hardener, plastic spreader... : about $5-20 (1 qt is enough, and you will ONLY need this if you're going to PAINT)
Paint Supplies - It depends on the color and 8oz is enough or you can either take it to the body shop to paint it if you don't know how.
Tools
who sitting by the dock of the bay?
Router w/various bits and circle jig (I made my own jig)
Drill w/various bits
Angle Grinder with 40 grit disc
Die Grinder or Cutter.
Scissors/shears (NOT your mom’s favorite pair – they will be ruined!)
Dremel rotary tool w/various bits
Tape measure
Disposable rubber gloves (Trust me! You will need this!)
do i have to winterise my outbord motor in my boat??
If you're ready... let's start on this baby :lol:
what is life like for someone working on a ship?
PS: Please DON'T post until I finish this tutorial! Please pm me instead. Thank you
what size prop would be best for a 175 evinrude on a 20ft boat with a sixty gal fuel tank?
if you go to wal-mart it'll cost you about 20 sum ole bucks for the resin and m.e.k.p,, fiberglass should be less then 20 bucks, then youll need a filler to fill in the pin holes left by the fiberglass, can use bondo for another 20 then youll need sand paper for bout 10 bucks. and for all that you could make 2 boxes. then its according to what you make the frame up out of. jus scrap wood is good enoughMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.