Question:
Answers:
I need expert advice on an audio sytem for my silverado?
Yes, of course you can.How can i find the radio code and how to enter this code for my 1994 mercedes benz 320E ?
The easiest way is to use an aftermarket amplifier with hi-level input, so now instead of connecting the factory head unit's speaker out to the speakers, you connect them directly to the hi-level input on your new amp, and the new speakers (and preferably sub(s) are connected to the amp.
How many watts will a jensen 650 watt amp give to 2 12" subs?
Second, the better way is to use a speaker level to line level converter, which has a pair of RCA outputs. So, now you're free to use another accessories between your head unit and your amp(s), be it EQ, Crossover, Bass Expander, etc.
Recommendations about installing a new sound system?
Third, the best way is to use current digital sound processor (DSP) after the converter, that has the ability "manage" your speakers. Why, because usually the factory head unit, especially the high-class ones, has been equipped with built in equalization circuits to compensate the original factory speakers. If you use it with different speakers and location, the equalization won't work, the sound will be terrible. The DSP has enough tools (EQ, Crossover, delay, etc) to compensate this problem. Many are available, including JL's Cleansweep (the easiest to use), Rockford's 360, Alpine PXA, etc
Who makes better amps alphasonik or autotek . I am going to put it with a 12 inch tc sounds 3000 .?
Hope this help
speakers, yes..amplifier, maybe...depends on if your radio has front/rear audio outputs, and a remote wire. If so, then yes you can. I suggest takign out your radio and looking.
Amplifier Remote and power switch?
Yes, even if you don't have low level outputs (RCA). You can use either an amp with high level inputs or a "line level converter" to convert the high level signal from the speakers to low level.You can find level converters at Wal-Mart that are pretty good, it's a Scosche brand.
Is Total harmonic distortion rating on a car amplifier important when using subwoofers?
Yes. Get a Line Out Converter, or LOC. This nifty little device turns the high powered signal from your radio to a low-level (RCA) signal. LOC's don't give you as high quality a signal as a true RCA output, but gets you by.Thinking about getting a kicker Zr1000 for my 2 12" JL Audio's?? GOOD OR BAD CHOICE??
Yes, it is possible. You might need to apply an adapter, but it is easily accomplished.If your factory stereo doesn't have RCA outputs, then you might need to purchase a Speaker-wire-to-RCA-adapter and wire it to the speaker wires of your factory stereo. This is so that you can run a signal to the RCA inputs of the amplifier. Connect the RCA cables, then connect speaker wires to amplifier.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.