Question:
is there some sort of reset button, i have a BOSS amp its a 4 channel, and my speaker are not working, i guessing that it is the amp, the protection light is on, and not the power light, how do i fix it or what is the problem
Answers:
MTX AUDIO Thunder 502 amp have power but unit wont come on?
Make sure one of your speakers hasn't shorted out.Is there downloadable guide on tuning car audio EQ and crossover?
First and foremost you probably have a wire touching another. Check you power and ground to make sure that they are not touching at the amp or before. Then check to make sure your remote wire is not touching either. If you haven't found it after trying this you should check the fuses for the amp.Which are better JBL P652S or Pioneer TS-D161Rs?
GL
I cant turn on a power amp for the car ,,,remote??
Protection usually means some things shorted. first trouble shoot speakers. Take a meter put on Pos and neg then test for conanuity . if not speakers then tst if 12 volts is on pos. remote has 12 volts from acc. your ground is secureWhere can I get a, and what kind of radio wire harness do I need for a 2000 pontiac sunfire?
all of the above or the amp just got too hot and all you have to do is wait for it to cool ofIm gettin these L7 15s what amp should i get and what crossover and should i get 2 or 4 ohms?
check all ur wires, somethign may have come loose and is touching causing ur amp to go into protection. dont just check the amp wires, check ur wires that run to ur subs and speakers.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.