Question:
2007 Ford fusion.
Answers:
How do you know the limits of your sound system?
Get a line-level converter and attach it to the leads from the speakers in the rear of your car. Then hook the RCA's to the input of your amp. Seeing as how your OEM (stock) car stereo does not have a remote turn on you might want to run the remote wire from the amp a switched scource in the fuse panel such as your radio's fuse. It doesn't really draw any current so that fuse should be fine. They make line level converters with the remote switch built in but they can get expensive. Run your power wire from your battery to the trunk and make sure you use a good ground or else you will get lots of noise. Keep your audio wires away from your power wires or you could get noise there too.I need a wiring diagram for 2002 mitsubishi mirage for free where can i get it?
easy, theres an adaptor they sell that gets u pre amp outputs, you'll be all setLooking for a good-value sub and amp for my car , and a few questions?
Get an amp with low level inputs, then splice the speaker wire.I have a nissan murano and i need help with the speakers?
you just go to best buy and ask for a high-low converter, if you have bass knobs you will need to use them if not you can get them for some amplifiers, if you aren't sure when u get to the store what to ask for i would talk to the installer instead of the salesmen, look for somebody with a mecp certification patch on their sleeve (installers have them), they will know exactly all the parts you will need for that particular vehicle, if you dont have a best buy around you circuit city or any audio shop should have it, good luckMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.