Would this amp work for these subwoofers?

Question:
I have two 12" sony xplod XS-LD125P5 Subwoofers.

I was wondering if this amplifier would work to power them or if it wouldn't be good for it.

I want to charge my motorcycle with a 10 & 2 AMP charger?

AMP: http://www.xplodsony.com/xplod/amplifier...
Subs: http://www.xplodsony.com/specialty/subwo...

Answers:

You can wire those subwoofers to the amp but you will only get 550watts RMS from it by wiring them like this...
http://akamaipix.crutchfield.com/graphic...
But you will be under powering them by 250watts

2 ohm 4 ohm question guys?

If you try to wire them at 1 ohm you can fry your amp, because it is not stable at that level.

Radio Meomory Problem?

The reason is because they are 4ohm DVC subs.
those subs can only be wired to draw a 1 or 4 ohm load from the amp. they cannot get 2 ohms.

Can i wire a sub and amp to a standard ford stereo?

you should try to find amps rated around here.
800watts RMS x1 @ 1 ohm - wired like this
http://akamaipix.crutchfield.com/graphic...
800watts RMS x1 @ 4 ohms - wired like this
http://akamaipix.crutchfield.com/graphic...

Car system?

The closer you can get to that wattage the better.

How can I determine make and model of car radio without face?

also..higher ohm load will give you less distortion, longer amp life, and less heat on the amp.

Why did my head unit stop working?

good luck

Does anyone have links to custom Ford Taurus interiors?

the way to figure this out is to see how much "continued" wattage your speakers use. For instance, i have two DUAL 12" woofers in my car, their peak is like 3000watts, but their continued wattage is 1500watts, so you would get a 1500watt amp, not a 3000watt amp. Also get a two channel amp, not a 4channel cause those are mostly made for your speakers not woofers.
OVERVIEW
check continued wattage on woofers and match with amp continued wattage
get 2channel not 4 channel amp

How can i get the code for the radio for fiesta car stereo N reg?

PS, check the ohms on the amp. A lot of amps will have different continued wattage for different ohms, mostly wanna stay around 2-4 ohms as your high point. Hope this helped a lot.

I have a 1000w mono amp, that is stable at 1 ohm. can i hook two DVC 2 ohm subs up to this amp?

hell yea...i got the same subs im my girls car hooked up to a peice of crap 800 watt pyle amp and they pound hard as hell just wire the subs up rite and you'll be good

Follow up to my car wiring stereo DEH-P3700MP?

Yay, bored finally got one right.

Does anyone know of a car audio site with excursion or something like that in the name?

See my site for more info http://spkrbox1.spaces.live.com...

More Questions & Answers ...

2 12" KICKER L7 w/ 1600 rms HIFONICS AMP w/ 4 far. cap will i need alt/batt?

How do i remove the factory cd player from a 07chevy cobalt?

Does anyone have any documents about amplifiers and how to fix them?

Since it doesn't look like i can wire a 2channel and mono amp together,keep the 600 2channel or 500 mono?

I need help installing a aftermarket deck in my 2002 aurora with onstar and without bose! any recommendation?

I NEED a mono amp. and advice?

Will it sound okay if i have this setup in my truck...?

How do I remove my 1994 mazda AM/FM Radio with cassette player?

Good car drifting music?

My new Honda Accord doesnt have an mp3 adaptor place...what should I get that isnt expensive yet works well?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.

Would this amp work for these subwoofers?

Cars Q&A Resource