Question:
I need simple step by step directions to hook up a pre fab box and amp to my van. can I tap into the exsisting speakers in the back or do I need to yank out the head unit.i need the easiet way, i dont care about the looks i just need a little extra sound. Can some one help?
Answers:
Anyone know the radio wire diagrams for a 2002 mazda tribute?
You need a amp kit like the link below…..Correct amount of power for subwoofers?
http://images.google.com/imgres?imgurl=h...
How can i get a screw thats stripped OUT...to small for a screw extractor..and its in a car stereo.?
Once you have that……
1.Hook the red wired to the battery and try to find a opening from your battery to the back of your trunk. I drill a hole somewhere under gas petal to get my wire threw the back of my trunk.
2.When that is done, cut the red wired in the front of the battery about 20 to 30 in and hook the little glass thing that looks like a light bolt to the cut wire so your amp will be safe from burns. It comes with a fuse so when it is hook up, put the fuse inside.
3.hook the blue wire from you receiver or cd player to the back of your trunk.
4.Hook the RCA also from your receiver to your trunk. After that is done, hook the RCA ans blue wire to you cd player.
5.Than hook the wired to your amp and everything should be fine.
Fi,RE,hifonics,jl audio,mtx,kicker,ppi,dd,Rockford Fosgate, jbl?
Tips. Most factory cd player won’t work so you have to get a new one.
CDs wont play in my car stereo?
you can buy a line output converter from an electronics store ie circuit city, that will tap into the rear speakers and giver you the rca outputs normally found behind the radio. The power you will have to get from the battery itself through an amp kit, not hard just runs under the plastic or carpet of the van floor.What kind of speakers and Deck would go good with my truck?
The amp will most likely need input from RCA cabels. You can buy a converter that will tap into the wires going to the back speakers however this wont give you the greatest sound. Tapping into the head unit will be well worth the extra trouble unless its an older unit or the cars original unit then it may not have an output for a subwoofer and tapping into the existing speaker wires with a converter will be the only way to do it.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.