Question:
1990 chevrolet silverado factory antenna cable end is messed up. i have an after market cd player with antenna plug for it that is supposed to connect to the end of the factory wire. can i just cut the metal ends off the factory wire and the other wire and splice them together like speaker wire?
Answers:
I am trying to wire up my 6x9's to my amp along with my sub?
yes solder if you canno antenna wires are made more like the coaxil cable on your tv you would need to replace the end or replace the whole wire
How do i connect my mp3 player to my car stereo ?
My answer would have to be NO. I accidentally severed my antenna cable for my satelite radio just recently. I stripped the cable and tried to splice the two ends back together like speaker wire. It did not work at all! Best of luck.Which car sterio is best for Ford Ikon?
you could but go to radio shack and I think they make an adapter that will fit your cd player and the GM end will fit inside it.Ford cd 6000 i removed from a ford Ka?
It can be done, but you must understand how coaxial cable is designed.How can i find the radio code and how to enter this code for my 1994 mercedes benz 320E ?
You can either buy a male motorola plug that fits the factory cable or fix it like so..
2000 Ford Focus Speaker Removal?
You will need:
1. heat shrink tubing that's 1.5 times as large as the coax and 5" long
2. heat shrink tubing about 1/2 the size of the coax and 1" long.
3. two sheets of aluminum foil, one being 4" X 4", the other 3" X 3"
4. soldering gun and solder
5. razor blade
6. lighter or heat gun
Steps to follow for correct connection:
How to remove the radio trim from a 2005 f 150 stx?
1. Strip back the outer jacket of both ends 2 inches avoiding cutting the outer wire braid and slide the larger piece of tubing over one of the cables.
Whats better, alpine SWR-1222 subs or the Alpine SWR-1242 subs?
2. unbraid the braided wire and fold it back on both ends
What are the best subs for the price??
3. using a razor blade, very carefully cut away the insulation of the inner conductor 1/2" from both cables and slide the smaller piece of tubing over one of inner wires you just stripped.
Would two 8 ohm subs wired in parallel on a mono 500w amp share the 500 watts, or each run at 250?
4. overlap the two copper center wires and solder them together, allow to cool and slide the smaller heat shrink tubing to cover the solder point and heat the tubing to shrink fit it in place.
5. wrap the 3" X 3" of the aluminum foil between the two unbraided wire and fold the braided wire back over the aluminum as if to try and touch the two ends of braid together.
What is the factory stereo wire colors for a 92 Gmc Vandra?
6. wrap the 4" X 4" of the aluminum foil over the braid wire and slide the last piece of tubing over the aluminum foil and shrink with heat.
7. sit back and admire you professional job.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.