Question:
Need to install Cd player and remove old cassette player, apparently there are buttons that will release it but its not working
Answers:
I have 2 12" subwoffers and a 1600 watt amp. whenever i change source or change station i get a loud thump why
First remove the ash tray and that will revile a screw that has to come out(left). The facia will still be stuck because of a latch of the right so use so don't be afraid to use some force to pull it out. It will still be attached at the top. Put the car in to 1st gear (auto) and then pull the facia towards the windscreen. Now that the facia is off your real problem starts as there are anti-theft screws that need to come out. Your options are drill them out, chip away at the middle part till you can get a screw driver in there or get your hands on a tool called t-20 torx. Car audio shops have them so if you ask nicely enough they just might lend it to you. Good luck!!
where do i connect the red, yellow,and black wires in my car stereo?
naa a long strong leverage actions what you need
More Questions & Answers ...Kicker Combo help?
Peugeot 206 radio goes into Eco mode when driving?
Why is there engin noise still coming from my subs?
How many amplifiers can you plug up in a 1991 Pontiac Graand Am?
Why won't the buttons on my Pioneer deh-p2000 car cd player work?
Anyone know where I can get an instruction manual for a Ford 6006e stereo?
too much bass?
I am a beginner to car audio and need help figuring out what i need.?
Do you think that an amp over 800 watts will damage two 12 inch, 400 rms each sub?
Does anyone know the best place to get a radio alarm clock?
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.