Question:
I need a complete list of everything i'll need to install 2 12" kicker c12 subwoofers (beyond subs,amp, and box) by the way i'm want to still use my stock head unit
Answers:
How to choose car stereo speakers?
Amp install kit, including the following:--power wire with ring terminals
--ground wire with ring terminals
--fuse and fuse holder (ANL or Maxi fuse holder is better than AGU, but less common)
--remote wire
--RCA cables
--speaker wire
How do I enable bluetooth on my ford 6000 cd radio?
Spade terminals for the speaker wire, if required to connect the speaker wire to the box or sub
Fork terminals for the connections at the amp, if required; these aren't always included in amp kits
A good quality line-out converter to adapt the factory speaker outputs to a line-level signal that can be connected to the amp with RCA cables
Mounting screws or bolts for securing the amplifier, plus materials to build an amp rack if required
Nut and bolt or self-tapping screw with star washer for making the ground connection
I have a 1800 watt dvc subwoofer how do i get less power out of both coils?
Depending on the vehicle, you may also need a battery clamp or replacement battery post to connect the power wire to the battery.
If you want to use your stock head unit, look on the back to see if you have a place to insert two RCA cables. If not, you will need to buy an aftermarket head unit. Than, at your local auto parts store, they usually sell a kit that comes with RCA cables and a remote wire. This will cost anywhere from 10 to 30 dollars. Than, you just need to hook the wires up, and run the wires. Good luck!
$400 to start on my Lancer's sound system?
here's a link to them on ebay.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.