Question:
step by step instructions please!
Answers:
when i turn my aftermarket radio down my sub doesnt go down?
You don't provide enough information to fully answer your question.Is there a way to hook my sidekick 3 up to my Car Cd player?
We need to know:
car amp installation question?
watts RMS of each sub
watts RMS of the amp at what load impedance
E-mail me me and I can get you on the right track.
sparky3489@yahoo.com
_______________
Advisory: Avoid the person with the screen name HardThinker. He is portraying to be someone with knowledge, ignore him.
components or 3 way?which is better?
Here is an example:
Why is my MTX 15" Thunder 9500 making funny noises?
http://answers.yahoo.com/question/index?...
The answers given by this individual have been deemed to cause serious personal injury or equipment damage.
It depends on the impedance of the three woofers (I assume they are all identical). If they are all 4 ohm speakers and you hook them up in parallel, the load they put on your amplifier will be less than 2 ohms, and you need to make sure your amp can handle that. Some amps can, some struggle (which means they overheat). If your speakers are 2 ohm, you should probably only use 2 of them because hooking the 3 would apply less than a 1 ohm load to the amp (tough on all but the very best amps).
How should I customize my settings for my Pioneer Headunit?
What is the wattage of each 10? can the amp push all three? If the amp is strong enough and the wattage isn't too much for the speakers you can try jumping it. have the positive go from the amp to the first speaker, then have a jumper go from that positive on the first speaker to a capacitor then from the capacitor to the second sub. repeat until all the speakers have juice. The capacitor will make sure that there is no loss of juice as you're goin down the line from one sub to the next. If the wiring is done neatly it looks rather neat. You could also just have three separate positives, one coming from each sub and splice all three together at the positive on the amp so each sub is directly pulling from the amp. Both of these solutions are just quick and easy inexpensive ways to get this done. Your best bet is just to keep one 10 and trade the other two for a bigger dub like a 12 or 15 and you'd get good sound that way. each sub would give you different sound.how to calculate dieminsions for speaker box?
Either in a parellel curcuit or a series curcuit or a series parrellel curcuit. dont mix sizes on one amp.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.