How do i remove the radio from a 1993 ford ranger stx?

Question:


Answers:

How hard is it to change the drive shafts on a Citroen AX ?

cut a regular coat hanger and bend it to go in both the holes at the same depth and it will release your radio

---

Problem with stock radio on 2005 Pontiac Sunfire?

You need a set of the Ford DIN tools - available at any autoparts store. Basically they snap into the four holes you have on the edge of the radio to release the clips behind, then you just pull it out...

---

Kia thing?

Ok, the first guy is right, buy a set of cheap tools, but you also need to pull out the ashtray,remove the two 7mm bolts, pull the ashtray assm and base out, the rest of the dash face plate will just pop out with a little pressure.
Put the tool in, with you thumbs, push the tool to the outside of the radio, the radio should slide out, install your new radio, and then reinstall the dash panel.
Hope it helps..

---

More Questions & Answers ...

I have replaced the ignition key switch 3 times on my 96 camery?

I am looking for a good website to find the inner body pieces for a 1989 mustang front?

Widebody kits for mercedes clk 320 (w209)?

1992 Saturn has rich fuel. What does that mean/?

Is a Bmw 525i really bigger than a 325i?

Does anyone know what an Aerial Atom is?

How do I reset my Perform service warning on my 2004 Jeep Liberty?

Model 2008 - already ?

Exactly how much money will it take to fill up my gas tank?

1988 chevy silverado k1500 5 wires got melted on exhaust manifold passengers side?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.