How do you replace a rear abs hub assembly?

Question:
I have a 01 monte carlo and i need to figure out how to change my rear abs hub assembly, left side. Please tell me how so i dont have to pay $1000 having someome else do it

Answers:

On a 91 Maxima with a 3.0,what is the valve clearance or adjustment?

This is a pretty easy job for anyone mechanically inclined. Take the rear brake caliper off, remove the ABS connector, slide the rotor off(although it might not exactly slide, think penetrating fluid and light hammering), obtain the proper Torx bit, and turn the 4 bolts out of the axle. After the bolts are removed swing your hammer as hard as you want to knock it off the axle. Clean up the area and reverse the task. You might want to put a dab of bolt Loctite on the hub bolts before re-torquing. Good luck.

---

1995 pontiac grand am overheating. new radiator, thermostat. mechanic says air in system. any ideas?

If you are mechanically inclined your asking about the tamperproof bolts; a needle nose vise grip works great

---

Cost for replacement keys on Galant Mitsubishi?

REMOVE CAILPER &BRACKET REMOV E BRAKE ROTOR THERE SHOULD BE A WHOLE IN HUB ASEMBLY FLANGE TAKE A SOCKET & REMOVE BOLTS TAKE HAMMER &KNOCK OFF.

---

More Questions & Answers ...

Where is the Interior Temperature Sensor in Audi A3?

What is the difference between taillights on a 90 Accord 2dr and 4dr?

Does a 1997 pontiac grand prix have alloy wheels, or steel?

where can i buy a good fiat punto gt?

How many miles to the gallon should my 2000 528i get?

How do I change the headlight bulb in a 2003 mercedes c230?

Are there any known problems w/ the 98 eclipse spyder it has a 2.4L 16V SOHC?

where can i find custom dashes for trucks?

Who Makes the Best Car?

led blinkers?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.