Question:
nobody knows how to open a lock on a car door?? its an old 94 ford thunderbird?? i even have the hood open but my spare and my key are inside? and please spare me the critics I have not the patience now
Answers:
How do you set the digital clock on a BMW 3 series E46 saloon?
I'm guessing the windows aren't open at all, since it's winter.Is there anyone else that has a key to your car they could open it?
1999 Honda civic coupe EX - wiring audio input?
Call a lock smith, if you do not know what you're doing you can damage the connecting rods or connectors. Lock smith is you're best bet. Any information on how to break into a car, or steal a car is illegal to post on a public forum.What is the manufacturer's recommended tire pressure for a 1990 Acura Integra LS?
If the door unlocks from the inside when you pull the handle you could simply thread in a wire hanger, hook the handle and pop it open. I've done it on Neons before. You may have to pry the top of the door open a little with a large screwdriver, and it will probably damage the rubber seal, but it should work.'98 GMC Jimmy... How many miles per gallon can you estimate this car gets?
Got a sun roof you can open or remove.Do you have a mushroom shaped lock on the top of the door panel, or is a lever located on the inside of the door pannel?
If your door is not framed (the glass is against the rubber seal), you can probably get a metal coathanger inside to hook either the lever or the plunger. You may damage the weather strip.
If the door is framed (the window goes into a metal border) then you will have to try to get between the door frame and the seal. Either way, you will have a much easier time if you start at the top of the door, nearest the back, this is where the door can be pried easiest. If the car has power door locks, try going for the electric switch. Another possibility, is using a thin strip of metal with a square notch cut near one end. Use this to slide between the bottom of the window and the outside of the door (just inside the rubber strip running along the top of the door). You may be able to hook the metal bar that connects the lock and the latch. This will have to be moved (pushed, pulled, raised or lowered), depending on the lock/unlock movement. This is called a SLIM JIM and are illegal to posses in most places, so don't carry it around with you later.
Assuming you do get in, make a spare key, put it on a different key ring, and don't put it in your purse, keep it in your pocket so you will always have a key on you.
Hope this helps you "in" .
Would anyone recommend a toyota carolla?
Pulling on the top part of the door and installing a wedge, keeps a crack so you can pass a wire or stick and hit the unlock button, or pull on the inside door handleTake the VIN number and proof of ownership to a Ford dealer. They should be able to look up the code and cut you a new key.
Or, you can call the locksmith. That may be cheaper than damaging something trying to stick a coat hanger in the window or something like that.
auto parts store get a slim jim i slides along window 6 inches from rear of doorpush the noched end down til you feel it hit something it will pass buy because it is only a locking mech rod but that what you want know pull up and back to the rear of door and bingo unlocked
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.