Question:
Answers:
Is the 350 not enough power for you. You could have a Olds 307 (Y) motor thats rated 140HP & tops out under 3000 RPM. I say be happy with what u got unless you're building a race car.
No, because the new engines are smaller than the engines in that time period.
what is "THE" best motor oil for a rotary engine (RX8). mainly protecting the seal. Thomas?
no,i,ll tell you why ,the higher horse power engine needs more fuel to run,I'm up against the same thing right now on a project car,they do make performance injectors though that will help it a lot,but your almost going to loose horse power on this engine if you cant get a good fuel supply to it,and its going to need a good supply ,you may also have to increase you fuel line size that comes from the gas tank ,i already did this and it helped some,but you,ll need the best performance injectors you can get for that one,I'm only running about 365 horse power right now,but with what your going to have ,that engine is going to need all the fuel and fire it can get just to run good,you can check this web site out its jegsperformance .com. they have the injector set up you,ll need for this one,i just got done installing some of theirs and they work excellent,I'm still waiting on a good test drive to see actually how well its going to do,check them out though ,they have some pretty interesting things that you might find real helpful on what your thinking about doing,good luck with it i hope this help,s.Suzuki Gran Vitara , is there any version which the roof comes off?
depending on the heads...yes it will fit......but you won't see 390 hp out of the engine even if it was rated at that.....the tpi efi system was really only ment for the 305 engine....in its stock form the intake chokes off the 350 engine pretty bad....and if your looking to see close to those number's you will have to post and polish the upper and lower intake manifold.....it will also need a set of after market runners (slp holly so on)....injector's will also have to be changed to a bigger size (stock 350 tpi system had 22 lb per hour injectors)....a higher flow fuel pump will needed as well (walpro can be bought for around $110)......and after all that the computer will need to be tuned....but the tpi system will fit...but that crate engine won't run at its peak performance until the mentioned things are done...Does anyone know what the current price of Lexus rx300 is?
The tuned port does no flow well at over about 4500rpms (because of the long intake runners) the 390 horse motor is meant to rev a bunch higher than that.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.