How do you remove the stock shift knob on a 99 Jeep Wrangler? Does it screw off or pry off?

Question:


Answers:

What would be some good modification to a 1994 ford crown victoria?

I just posted this question a couple of weeks ago for my '98 Cherokee. Apparently the method for holding the shifter knob on for various years and models varies greatly. These are the most common answers I got: it's threaded just twist it off(wrong), it has an allen head screw near the bottom(wrong), it has a lock nut near the bottom and you have to turn it to the right and tighten it down the shifter and knob will loosen to the left(wrong). The right answer for me was to pry off the center cap with the shift pattern. Underneath is a nut that you can take off with a socket wrench. It's kind of hard to pry it out and I did damage my original shifter knob, but it didn't matter because the previous owner had already done a number on it. Hope one of these answers is right for you.

---

Honda Accord 98?

Why don't you just try to unscrew it and then you will have your answer?

---

WHICH USED CAR TO BUY, ACURA INTEGRA,HONDA PRELUDE or LEXUS IS SERIES?

should be a set screw somewhere on the knob. if not, it snaps on.

---

More Questions & Answers ...

I have a 01 maxima gle with a p0171system too lean bank 1 how to i fix this?

I have a purple toyota rav4 edge P reg want to change to black- will it alter car value?

I have a 2000 Jeep Cherokee Sport. All stock?

What are some upgrades to add more horsepower and torque to my 98 plymouth breeze?

Which car shall i get , ford puma or ford focus?

Skoda octavia 1.9tdi turbo gone slight loss of mpg is this common no smoke?

Easiest transmission swap for mustang 1965?

I have an 1989 ford ranger and what to know if a bumper off a Jeep would fit without a lot fabrication?

Which cams would be best for my ls/vtec?

2001 Saturn SC1 or SC2?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.