Question:
Answers:
For a ford taurse what is the firing for distorbutor cap to spark plugs order?
According to my Jeep Catalog, it's a YJ. Yes the 350 Chevy engine will fit but be prepared to make a lot of modifications. There are several companies that sell the conversion kits to simplify the job somewhat. Unless you're a pretty good mechanic, don't try it."SERVICE 4WD" light on in my 2000 Chevy Silverado?
yes. there are MANY kits sold for exactly this engine swapgood luck
IAT SENSOR on mondeo 03 TDCI 130HP?
94 is a YJ. Yes you can put a Chevy engine in it. Do a search on Jeep forums and Jeep magazines to find info. Try and find a local Jeep club in your area, someone probably has done a similar engine swap and could give you some pointers.2003 Lancer Noise In Rear Suspension?
It is a YJ model & yes a Chevy motor will fit in it. Look up Advanced Adapters on the web because they carry a wide range of motor mounts, transmission adapters, and wiring adapters to make this a virtual bolt in project. A weak point you will run into is that the Dana 35 rear axle you have is not strong enough to handle V8 power. A stronger rear axle such as a Dana 44 or a Chrysler 8.8 would be a stronger choice and should be easy to find a width to match your current size.Are PT cruisers reliable cars? I wouldnt be able to get a new one..maybe an 01-03?
If you have the 4.0 straight 6 engine, you should stay with it.. It is a great engine in a wrangler. If you have the 4cyl.. then you already know that it can hardly get out of it's own way.. There is a turbo kit available for the 6 if you have to do mud, but otherwise the straight 6 is great and I would keep it.Wranglers are YJs and small block Chevy swap are simple and common with advance adapters kits. It's a project but can be done relatively easy
On a car can you put the gas pedal on the left and the brake on the right?
CJ's were last produced in 1986. The YJ also known as the "Yuppie Jeep" can be modified to fit just about any GM engine and transmission into the thing. Lots of aftermarket parts as well.YJ.
Yes, must usual is the SBC 350.
I'm in the process of doing it, moved the engine + auto tranny + transfer, 350+TH400+205, with stock diffs, rear shaft is coming quite short.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.