Question:
the 1992 is tbi and the 1985 is carb.
Answers:
The main reasons for a roller set up is less friction=more hp.Plus the rollers on a high lift cam are less noisey so that it doesn't set off the knock sensor and retard the ignition timing=more hp.
03 mitsu endeavor will not come out of park -- please help.?
That's funny.NO.
Where is the turning signal flasher on a 2002 pontiac grand am.?
no wayWhere can i find a transmission for a "96" chevy blazer 4x4?
Unfortunately no.The cam will physically fit, but the '85 block is missing the provisions needed to hold the roller lifters in place.Most OEM roller engines use what called a "spider" that holds down the "dogbones" which in turn keep the lifters from spinning. The "spider" is typical bolted down to the lifter valley, and the '85 block will not have bolt locations...
What have you done to your Dodge Ram Cummins diesel to improve the mileage plus performance?
No , the 85 block doesn't have long lifter bores . Look at your local salvage yard or ebay for a roller block , you will be glad you did . You can gain 30+ HP by not losing it to friction with the flat lifters.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.