Question:
What is the stock gear ratio in a standard base 1991 Jeep Wrangler?
A) 3.55
B) 3.73
C) 4.10
D) 5.13
Answers:
Do Mazda RX7's give a lot of engine trouble?
I looked at wikipedia, and answered it off of wajas, its B.What is the proper tire pressure for a 1967 ford mustang?
there are 2 tabs on your differential the first 3 numbers on the second tab will tell you the gear ratioMost 6-cylinders got 3.07 or 3.55, most stick shift manual 6-cylinders got the 3.07.
Most 4-cylinders got 4.10, but 3.73 was also an option.
Has anyone here ever put a tpi system on a little 283.?
There are several methods for figuring out what gears you have. First there should be a tag on your diff cover. You can see this tag is stamped 3.07:
http://www.cdmfabrication.com/bbpics/axl...
Which of of these cars are better - BMW 530 or BMW 730??
Next Dana axles have a bill of material code, which identifies everything in the axle this is stamped into the axle tube itself, and can be hard to spot as its very light. This picture shows a bill of material stamping:
What colors of blue where used on 1967 chevy pickups ?
http://www.cdmfabrication.com/bbpics/axl...
I can't get my 98 chevy 2500 to start. it clicks and has ample power but won't start any ideads?
Once you have this number, you can decode it on this Dana website:
How do I check the transmission fluid on my 99 Pontiac Grand Am?
http://www2.dana.com/expert/wc.dll?cvsp~...
Exhaust help for a 98 nissan 200sx?
You can also roughly estimate the gear ratio, by jack the rear axle up off the ground and spinning a tire, if the pinion makes 3.5 turns for one turn of the wheel you can figure you have 3.55 ratio.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.