Question:
Answers:
Where in California can II buy a used engine for a Toyota 1986 pick-up turck?
if you are going to take it to a shop besure you get an estimate and sign it, it should be around 200 for parts and labor. you can buy your own radiator from csf for much less and install it yourself in minutes.http://www.hondahookup.com/
Chevy Silverado engine rebuild kit?
Are you just wanting the part, or do you want it installed?If you want the part, go to a junkyard. You could pick it up for around $30.
If you want a high performance after market, hks is your best choice, and your looking at about $300.
If you want a new radiator from the dealer, your looking about around $300-$400.
Installation can very immensley. Your looking at about 2 days worth of labor costs.
So a mechanic supplied part and labor=$700-$1000
How do I program the locks on my '03 f-150 to "not lock" when I put it in gear?
Call 1-800-radiatorthy have the best price anywhere
What Ford V8 do you like better, Clevo , Windsor or Modular ?
New radiator from wholesaler 60-75 dollars. New upper and lower hoses (while you are at it) $20 each for Gates brand @ autozone, Prestone coolant and one gallon of demineralized H20 $12 from Wal-mart. May need new hose clamps depending on condition of old ones 1.50 each may need up to four from Autozone.Tools necessary to complete this would be a pliers, ten mm socket and ratchet, drain pan for old fluids. basic install nothing crazy should take an hour-two hours depending.
what went out with my brakes on my 97 GMC Sierra pickup ?
MAy also think about changing thermostat while you do all this $14 more for failsaif brand @ Autozone.
Will a rear fold down seat assembly from a 1971-73 Mustang Fastback fit a 1970 Mach 1?
F.Y.I
Hahhaa I don't work @ Autozone but frequent that store to buy parts 'cause they are close to me.
good luck,
Ksib
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.