Question:
if so what do I need to be cognizant of and how big of a job will it be.how much
Answers:
Anybody knows where I can get 20 hp motors for car?
well it can but i dont think you can legally do it as the emissions controls are different and the 78 engine wont have a computer and such. but beyond that i dont think the motor mounts will line up you would definatly have to map out the project after you check you local auto codes as to emissions standardsDo you feel getting the optional BMW service contract that extends from 4/50 to 6/100 worth it?
i don't know how much it would cost. but it would be horrible for gas.lack of steering at low RPM on 96 cherokee?
Yes it can, provided it has the same intake and heads!Can i retro-fit a turbo onto an '89 escort gt?
yes maybe a lil mod around the firewall deff diff engine mounts. might have a slight problem im guess the 350 is carb. still should have room to play with.go with a small air cleaner and slimmer intake manifoldi have a 96 nissan sentra. how do i take the panel over the speakers in the back off?
Yes, with a few modifications. You would have to use the 91 intake manifold and fuel system and belt drive system as the pulleys will be different. The block and heads are a bolt in swap.i WANT A DIAGRAM FOR A 89' ELDARADO CADILLAC COLORING CODE?
if your williing to lose most gauges, and not have any electrical stuff in the cab or on the motor then yea. plus you have to deal with driveshafts and all that.it will but with modifiactions ur better to save time and money by getting the proper engine
Has anybody upgraded bucket seats in 1990s civic.?
the block is the same every thing from the heads up is different. you could use the old block and swap every thing from the heads up. and don't forget to block of the fuel pump hole on the side. i have done the swap a few time and it will workChevy motors are the most used in engine swaps they can go into anything this why a 95 lt1 can go into a 62'chevy.It can be done and for a resonable price most shops 60-80 per hr and machining is based on flat rates and you can find parts for low prices but great quality on any autoparts website such summitt.com,jegs.com and chevytrucks.com..so good luck and enjoy
where is the release botton for the gas lid on an 2002 Kia Optima?
Yes. It's a direct bolt in, and an easy swap.installation instuctions for factory 05 gmc winter front?
Now that the question is answered without the confusion, you can worry about gauges, accessory drives, legalities (emissions), electrical, intake choices, carb or fuel injection, stock exhaust or headers, etc. You have many options and choices.
about the only thing you can use is the block and the rotating assembly.
the angle that is made when the cylinder head is bolted to the block is different from the TBI motors then the carbs.
also a vbolt water pump spins a different way then a serpentine water pump so you will need to switch that as well.
what are good car parts for a 07 dodge charger? opinions welcomed?
use the short block and swap everything onto that.
i want to buy a willie ww2 jeep new one?
It sure can, I always prefer the 350's over the 305's myself.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.