Question:
i have no choice but to go through the passenger side. I have try everthing please help me
Answers:
Did the Scion tC change from the 06 model to this years 07?
The problem seems to be with the lock or the latch mechanism for the door. It sounds like the lock linkage but could be a stuck latch. (The latch is what secures the door and releases the door; the lock simply prevents the latch from releasing the door)3rd gen camaro customizing for horsepower?
The chances are more that the problem is with the lock linkages than with the latch.
What do you think about BMW Z3?
It would be unusual for the problem to be with the latch linkage as there are separate linkages for the inside and outside handles, but I guess they could both come off.
Renault Clio, will the adverse publicity that this car has had on Watchdog affect sales.?
there is no easy way to do this. You will need to start by removing the front driver's seat. There are four bolts under the seat, one at each corner of the seat track. You need to remove the seat to be able to get to the door panel so that you can remove that panel to get inside the door and access the latch. The lock linkage is attached to the latch assembly
Anyone know about the 08 Subaru Legacy?
You remove the door panel by taking out the screws behind the interior door handle release and under the arm rest. You also need to remove the window switches. There may also be a bolt under the switch or a window crank if you don't have the power windows. With all of the screws and hardware off, you can pull gently on the outer edges of the interior trim panel to unseat the clips. Then push the panel upward to remove it. If there is resistance on top, you may have to reconnect the window switch to lower the window then try again to remove the panel. then, put the window up and follow the rod from the interior door handle to the latch and try to operate the latch manually by pushing or pulling on the connective lever. If the door still won't open, then the latch will have to be unbolted from the inside and removed to repair or replace
Is the chrysler sebring a good car ?
this is not a job for someone who doesn't have the experience or ability. If you are thinking "what am I in for?" then take it to someone who can do it without damaging the seat, door panel or interior door components. My guess is if it is the linkage it will be about $200 to repair; if its the latch about $300.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.