Question:
Answers:
How do you programme a key for a Ford Focus - I only have the master key?
You would need the original five digit keypad entry code to set your own code. In absence of the original code, to obtain this information, look under your instrument panel. Above the accelerator pedal (or gas pedal), and to the right, you will see the RAP module (the module that controls your keyless entry system). On the RAP module, is a decal with the part number (similar to F8DZ-15K602-AA), and FIVE large numbers, which is your five digit keypad code. To set your own keypad code, follow the procedure listed below:Is any car faster than the bugatti?
Enter the permanent code on the keyless entry keypad.
Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.
How can I tell my 1995 Toyota camry was made in US or Japan?
You can't reset it, just add a new combination.Put in the orginal code, door will unlock, then press button no. 1 door should lock and unlock, then put 5 digit code you want in, door should lock and unlock, then it's in
I need to disable my car alarm on my 1995 VW Jetta III, how do I do that?
You can have a new system installed at your Ford Dealer98 Dodge Neon Performance Enhancements?
First things first- You need to have a manual!Download & save it here (free) in PDF format:
https://web.msslib.dealerconnection.com/...
Instructions for the keypad (aka; keyless entry system) are found on pages 50-53.
It's really quite simple but you'll need the original (factory) 5 digit code.
If you don't have that, Rakel can help you find it.
I'm gonna e-mail her your Q.
Does anyone have a exhaust manifold for a 48 plymouth coupe?
hope this helps!
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.