Question:
I plan on upgrading my axles and all the to the super 35 kit and same with the 30 in the front. i am just wanting to know what i need to replace to regear? if i upgrade to a 30 spline axle from a 27 will i have to change my ring and pinion again? or will the one from the 27 spline work?
Answers:
I am thinking of buying a 1 ton cube van. Will a diesel or gas engine last longer?
The Dana30 3.73 and down would use one kit, the 3.92 and up uses another. On the Dana35 its 3.31 ratio and down, and 3.55 and up.What benefits do Toyota dealers get from the STAR program?
So if you want to change your ring and pinion, which I would be recommended if you are trying to run larger tires, you'll need to buy the proper kit. So if you have a 3.07 ratio stock, and you buy the numerically lower kit, you can't later switch to a 4.56 ratio without buying a new locker. So decide what you want to do the first time around.
Here's how to determine what gear ratio you have now:
Why does everyone hate the Scion xB's?
http://bbb.quadratec.com/cgi-bin/ultimat...
Here's a chart to determine what gear ratio you need:
http://bbb.quadratec.com/cgi-bin/ultimat...
Here's why you need to re-gear:
How do I replace the tail light assembly on 2001 xterra?
http://bbb.quadratec.com/cgi-bin/ultimat...
Where can I find a crankshaft for a 78 Malibu?
No, the 'super' kit takes replacing the open carrier with a locking one, and it'll be able to fit the larger axles while still using the original ring and pinion. If you were thinking of swapping gears, now would be the time.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.