Question:
Answers:
What's a good website to find performance parts for my 2000 honda civic si?
Dealer with scan tool, Take all fobs with, They all need to be programmed when adding remotes.91 Honda accord Lx drive door wont open inside/outside?
Your own's manual should provide the directions. Or have the dealer do it.Im looking for a soft top for a 95 wrangler- any suggestions?
It has to be done by a dealer with a diagnostic scan toolIs Infiniti going to re-introduce or re-design the Q 45 Luxury sedan?
Remote Key FOB InformationTransmitter Programming
1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the door unlock switch.
4. While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
5. Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7. Repeat the previous step to program up to 4 transmitters.
8. Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter programming mode.
9. Operate the transmitter functions in order to verify correct system operation.
take to dealer
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.