Question:
Answers:
rich f is right
i can tell you how to program a new one if you ask
how do I put oil in a 98 jeep wrangler, I can not seem to open the oil cap?
Ebay always has parts for vehiclesOpen the back hatch, look to your left..there should be a little panel there..remove the panel, get a flashlight and look inside. you should see a sticker there with numbers on it..thats the security code for your vehicle.
What auto had first built-in air conditioner?
remember if you add a "3" to the end of it, it will open all the doors, not just the drivers.
You can not find them. Ford used to put them in the cars and trucks but that made it to easy for the thieves.Now you need to follow the chart in the owners manual to set them . If someones already set them there is and chart for that too. If you don't have he owners manual go to the dealer and they will help you.Hope I helper good luck
Look in the owners manual, that's how i found mine :)
how much torque do you put on the bottom two screws of the carburetor?
The code can be read by a dealer using a computer scanner, or you can remove the interior panel from the drivers door, and the code will be on the control box.My 1996 Ford Tarus tranny does not have a burning smell?
On a 03 Explorer, the dealer can access it electronically, or the module is located in the right quarter panel behind the trim,just behind the second row seats. You have to remove the second row seat belt anchor at the top, and the panels i think will pop out far enough to see it, if you have a 3rd row seat, you might have to take it loose. It is called the vehicle security module.If this is a 4 dorr model, other models are in other places...
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.