How do you program a Keyless Entry Remote on a TOYOTA?

Question:
I own a 2001 Toyota Camry with a factory installed keyless entry system. The remote is no longer working and replacing the battery didn't help. I have a new remote but it needs to be prgrammed. I was told this is fairly easy and can be done at home. I googled it and found directions for Honda vehicles only. Please help. Thank you.

Answers:

Mercury Cougar Electrical Problem?

I use to be a service manager for Toyota Motor Company. Here's what you do...

Is an 01 Is300 Lexus compatible with an 04 Is300 body work, engine, suspension etc?

2001 Camry Keyless Remote Programming
1. Start with
a. No key in ignition
b. Driver's door unlocked
c. All other doors locked
d. Driver's door open
2. Insert key into ignition and remove
3. Press lock, pause, unlock (2 second total cycle) 5 times
4. Close, then open driver's door
5. Repeat lock, pause, unlock cycle 5 additional times
6. Insert key into ignition and turn from lock to "on" two
times (pause in
each location 1 second). (note: "ON" not accessory position)
7. Remove key from ignition
Locks should cycle twice. If not, start over.
8. Press lock and unlock buttons on transmitter
simultaneously for 1-2
seconds then release
9. Press lock and unlock buttons on transmitter again
simultaneously
for 1-2 seconds then release
10.Press lock alone for 1 second, then release
Locks should cycle once
11. Close Driver's door to exit program mode.
If you want to program more than one remote, repeat steps 8 - 10 with the second remote before finishing with #11.

TRYING TO BUY SOME SPRINGS AND WHEELS NEED SOME help?

Go slower on each step rather than faster and you
will have
better luck.

---

Does Anyone Know What Kind Of Model The 5 Speed Manual Transaxle In The Chevy Cobalts Are? And Who Makes It?

Its not real easy
you have to get the car into a program mode
its like insert the key 2 times , open and close the door 2 times the the key thing again and then the door , its a night mare and the timing has to be just right , you can try but even with detailed instruction i have seen techs that cant do it . you have to get the timing just right . good luck but it will be easier to just pay a dealer to do it don't let them charge you over 1/2 hour labor that's all we charge.about 40 dollars.

---

More Questions & Answers ...

Will a cold air intake for WRX fit a Subaru Impreza 2.5(just the regular one)?

what does vp in honda civic vp stand for?

How much will I get for my Toyota Yaris in a part exchange?

how can i spped up my computers?

what is the lug pattern for a 2001 ford expedition 4x4 ?

What is the purpose of the rest button on my BMW 525i air condition?

has anyone ever applied that toughliner to the exterior of their car?

Help! my 2003 ford escapes' alarm ha been going off for the past 2 hours and wont let me turn the car on or of

I've been thinking of getting the Hyundai coupe...is it a good car? "as a first car to own"?

can you put a 92-96 h22a obd1 into a 97-01 h22a4 obd2?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.