Question:
I got a Vauxhall Corsa 53. Is it possible to change the LED bulb on the dash board where the rev counter is and how would I change it if it is possible. Thanks
Answers:
V belt replacement scematic for 1984 chevy caprice?
I own a shop, and can tell you this can be done, but it is much easier to just replace the complete board. An LED is very hard to get out of a board once it is put in. It takes a heating iron, and a form of compressed air to blow away the solder once it is heated. They make a bulb type tool made for blowing the melted solder away. I'm not sure you can purchase just the LED by itself, so I think replacing the whole board is the way to go.Glad to help out, Good Luck!
What would be a some convincing reasons for buying a 1985 toyota celcia supra?
First of all, why do you need to change it? The dealership would be the best place to go to have them replace it. L.E.D. lights are NOT something the average Joe wants to really be playing around with. If you get the wrong voltage and watts and length, you will have quite a few problems, not to mention a few blown fuses when ignition time comes! Did I forget to mention the melted dash housing too?Need to locate the thermostate in a 1998 ford taurus 3.0L overhead cam.?
Yes its definitely possible. I did it recently. I would recommend using a Stanley Antivibe 20" hammer. Hit the dashboard hard 4 or 5 times. It should break easily and give you access to the LED bulb. Then use a small philips screwdriver to smash the bulb itself. Purchase some birthday cake candles from Tescos or even your local Spar. Stick one in the hole left by the screwdriver and put the spares in the glove box for easy access when it runs out and needs replaced again.Evo 7 vs. WRX STI which is better?
i know you can change it i just dont know how. sorryMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.