Question:
2005 chrysler 300 touring
Answers:
What causes manual trans to make noise?
Firstly, you have to use a drill to unscrew the screw that is in the front of the fog. Then, you have to unscrew 2 screws that hold the fog light in place to the bumper. Once that is done, take the entire fog out, change the bulb, then redo steps 1 & 2. At least that is the case for the 2002 Concorde Limited. It is a royal pain in the chulo if you know what I mean. Been there, done that!what year did the Saturn Ion? If you have one, do you like it?
Remove lens from front or bulb from behind unit.It's not as easy as you would think:
Disconnect and isolate the battery negative cable.
Open hood and remove the upper radiator closeout panel.
Remove the six upper fascia retaining fasteners.
Remove the headlamp unit.
From behind the bumper fascia, disconnect the harness connector.
Remove two fog lamp unit mounting fasteners.
Remove fog lamp unit .
Position the fog lamp unit in fascia opening.
Install the two fog lamp unit mounting fasteners.
Connect the harness connector.
I tried to make it simple. Hope this helps.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.