Question:
Hi I have A Nissan Pulsar 1990 N13. I was putting in a new stereo But forgot to disconect the battrie. Stereo Ok but the red weire that was live is not live anymore, All fuses are ok, Fusabale links under the bonnet ok. This has also stoped the number plate light, boot light and interia light from working. As I sed all fuses are working ok , everything else works ok like head lights instrument lights every thing, but what I have menchend. Any advice will be welcomed. The yellow wier fron the stereo is the battrie wire that is conected this red wier. Thank you for your time
Answers:
How many BMW Z8 Automobiles were produced?
It seems what you report can't be true. If you go to the fuse that feeds the number plate light, boot light and interior lights, I'm sure you'll find that there's battery voltage to ground on one side of it, but not the other. Replace that fuse and recheck to verify you have battery voltage to ground on both sides of the fuse. If the fuse blows out when you replace it, you have a short circuit somewhere you probably created when you were doing your wiring. You could prove it's in your wiring, by temporarily disconnecting all your connections and replacing the fuse again to verify that your lights are working again. You can easily check a fuse to see if it's good using a $15 Volt Ohm Meter (VOM) you can buy at the auto store or home center. It will also easily check for battery voltage on both sides of the fuse as described above.Where can I buy performance parts for my Ram SRT-10.?
maybe pay a mechanicMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.