How hard is it to change a timing belt on a 3.0 V6 Dodge? What else do you change at that time?

Question:

Answers:

DODGEMAN, another question one the 97' Dodge.?

This job is not for the unsure, it's a huge undertaking. I have done 3 belts on my last 2 vehicles over the years, always with a shop manual by my side and it was always a minimum 5 hour job plus and you got to have the tools. Tensioners, seals and water pump if in there has to be done as well.

My mountaineer has a blinking theft light my car wont start how do I fix it?

If you have to ask.......you aren't going to be able to do it. SOME people can just dive into a 4cyl with no experience and get it close, but I seriously doubt a novice is going to have much success on a V6. You replace the tensioner and water pump and anything else you break by not knowing what you are doing. GOOD LUCK!

Has anyone ever changed drum brakes to disc brakes?

buy u a book at the parts store for your car and it will tell you how to do it

would my vectra overhead cam back fire if?

that is the best way

how do I syphon gas from my 2004 dodge durango?

you should take it to someone that knows how to do it.
it takes 3 to 4 hours for an experienced person. I've done them..

More Questions & Answers ...

Left turn signal indicator staying solid on the instrument panel, why?

does any body know where a oilsending unit is located on a 95 chevey corsica 3.1 engine?

engine oil in 2000 trans am?

2001 nissan xterra?

What is the best way to erase the hard water spots on a windshield?