Question:
Answers:
Actually, you shouldn't have to...the system has a "water pump" bypass tube between the thermostat area and the pump itself. All you should have to do is fill your radiator slowly while running cold. As the engine heats up and the thermostat begins to open up, the coolant will go down some, top it off and put the cap on. It should do the trick...
Is it ok to leave my car out of alignment if I don't care about the tires getting worn out?
No cap on the radiator? Do it through the overflow/expansion tank, it does the same thing. Check it a couple times though, and top off to the line as necessary...
Are we talking about air in the system?
You don't need to. It will do it all by it's self as long as there's coolant in the overflow resevior, and coolant in the radiator is full.
I could give you a long explination, but I don't want to. Just trust me.
How much would it cost to get dark to my windows in my ford explorer suv?
dont need to bleed it it uses a tvs system with resovior . the only time i see air in the system is when the head gaskets are gone and pumping air in the cooling system , also look for oil deposits in resovior if found more than likley you sir need intake gaskets .More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.