How to change a timing belt in a geo metro?

Question:


Answers:

No light on Instrument Panel - Renault Clio 2002 model?

On the old 1.0 liter metro, remove the accessory drive (drive belts, anything in front of the timing cover). Remove the harmonic balancer from the crankshaft. Remove timing cover. Line up the timing marks on the crank and the cam. Release tension from the tensioner. Install new timing belt and apply tension to the belt. Turn the engine over by hand 2 revolutions of the crank shaft. Double check timing marks. If they are still lined up, reinstall timing cover and harmonic balancer and the rest of the parts you took off. If the marks are not lined up, remove belt, re-time, install belt and turn over and repeat until the marks line up.

---

More Questions & Answers ...

Break Lights and Horn not working ... HELP!?

Air Flow for a Diesel Engine?

What is the difference between gelcoat and clear coat ?

Is it easy to drill new holes in a spoiler to have it fit my car better?

How much does it cost to repair/replace a transmission?

I need to find out the value gap specs for a Honda 5.5 hp, GXV160 lawnmower.does anyone know where to look?

Why won't my high beams go off even when I turn off the engine on my 97 ford crown vic?

Michigan law requires that shops must give an estimate face-to-face before working on a car, what can I do?

Are parts cheap for a mitsubishi outlander 07?

How to get to the electric motor and track in the rear passanger side door of a Toyota RAV-4?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.