Question:
Answers:
How much should new ball joints and bearings for all wheels for my 98 blazer cost.?
I'm afraid a trip to the dealer is in your future unfortunately. The onboard PATS programming for '98 and up *requires two keys* for the procedure. However, here is the procedure:VW Bora Problem "Alternator Workshop!"?
1. Insert and existing (working) key into the ignition cylinder.
Oil Question Shell Rotella vs. Mobil 1?
2. Turn the ignition cylinder ON (RUN) and back to OFF. Ignition should stay on for at least ONE SECOND.
Water leaking through my firewall??
3. Remove the existing key and, within TEN seconds, insert a second working key and turn it to ON (RUN) and the back OFF. Ignition must be in ON for at least ONE second, but no more than TEN seconds. Remove the key.
Whats a good site to lookup aftermarket parts for an 03 dodge ram 1500?
4. Insert the new key before TWENTY seconds have elapsed and turn it to ON (RUN). Leave it the ON position for at least ONE second and turn back to OFF.
95 mercedes e320 engine noises?
5. The security light will light up for THREE seconds to indicate that the new key has been successfully programmed.
I have a 25 year old car; and the dashboard is cracked, parched and discolored from the sun.?
6. To program additional keys, repeat steps 1 through 5
If the key came with the vehicle it should be preprogrammed. I would immediately go to the dealer & purchase a spare, & have it programmed at the dealer before leaving.
- - -
I need tires and rims for 92 toyota camry?
go to the ford dealership and they can sell you a new key..i think all they need is the vin number and it only costs a couple bucksMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.