Question:
Answers:
I own a 1996 honda accord ex.?
I dont know if this helps its the procedure for a land cruiser.How do you measure wheel offset?
) With ignition turned ON, using the trip switch (select/reset button)
change the display to ODO, and turn the ignition OFF
b) While pressing the trip switch, turn the ignition switch ON and hold it
for 5 seconds.
Paint job for 96 Eclipse Cost?
c) Release the trip switch, then press the switch again within 5 seconds.
d) The digital display should change to T-belt mode. The initial display
"15" (0,000km) is displayed (ie. 150,000km).
Can a tire really explode if you put too much air in it ?
2. REWRITING REPLACEMENT VALUES
I have a Ford A/C R134 with 0 pressure and won't accept a charge even if compressor is running.?
While in the T-Belt mode, each press of the trip switch will change the
displayed value by 10,000km increments. Once " 20 " (200,000km) is reached
the display reverts back to " 1 " (10,000km) again. Remember, this setting
is the number of kilometres to be travelled before the light comes on next,
and once reset this counter will start from zero.
I believe the timing belt interval for all the 100 series engine variants is
150,000km, but this should be checked against each different markets
servicing recommendation. This being the case, you shouldn't need to change
from the default setting of "15".
06 Cadillac Escalade question?
Obviously for the US, the ODO is in miles, and I guess the T-Belt warning
would be set in 10,000 mile intervals.
Anyone who can help me build my own / convert into Hybrid Electric Vehicle ?
3. T-BELT WARNING RESET COMPLETION
How to change a timing belt in a geo metro?
a) After setting the replacement setting value, hold the trip switch ON for
more than 5 seconds then release the switch.
b) Check that the display has now changed back to ODO and that the warning
light has gone off when the engine is started.
Step by step guide on how to install a foglight bulb in a 2002 nissan sentra?
NOTE: If the T-Belt mode is completed, even though the belt replacement has
not been performed, the T-Belt warning IS reset.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.