Question:
I JUST REPLACED THE THERASAT AND IT WORKED. BUT THEN PUT SOMER BARRS HEADGASSKET SEALER IN NOW THERE IS NO HEAT AGAIN. SO JUST WANTED TO C IF ANY KNOW WHAT MIGHT B UP W/ IT NOW THOUGHT IF I TOOK THE THERMASAT OUT AND THEN RAN IT. IF IT WAS BAD IF GET HEAT AGIAN DOSE ANYONE KNOW IF THAT WOULD WORK R NOT. R IS THERE A WAY TO TELL IF ITS BAD AND IF IT NOT THAT I THOUGHT IT MIGHT B THE HEATER CORE THEN. BUT DONT KNOW WERE IT IS SO COULD ANYONE PLZ TELL WERE IT IS R OF A GOOD PLACE ONLINE TO GET THE LOCASON OF IT TY
Answers:
Why operate "clutch" for shifting gears?
yeah sounds like a clogged heater core, there should also be a heat control valve under the hood on the passenger side near the firewall that is driven by a cable or servo, it opens and closes when your turn your heat knob, make sure it is opening properlyhow would I go about finding the capacity of my radiators for a Jeep liberty limited 2002?
heater core should be under the passenger side of the dash. incased in plastic by the heater fan.
Send that POS to the bone yard!
Dude I could not understand a thing..you replace the thermostat and add Bar's leak to it...is there a leak..and then you removed the thermostat again ...OK first of all did ya replace the radiator cap..people forget its a sealed system held under pressure and if the cap is no good there goes your pressure ...first try the cap and did make sure that theres no air pockets ..you can do this by running the engine with out the cap..if I remember you might have your cap on your over flow bottle..try the cap first its..about 10 bucks..
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.