Question:
Answers:
'97 Grand Prix Water Pump removal?
just use a straight razor blade...just make sure that if you have tint to not scrape hard or the tint will come up and if its on the back windshield be carefull not to scrape off your defrost lines.How offen do I need to change my oil on a new Volvo?
Rubbing alcohol and a strait edge razor blade and or Windex and a green scotcthBriteMy Nissan's A/C vent isn't working! Why?
Here's a trick I learned from a car salesman who drove several different cars each week. He commuted through a toll tunnel and had to have a sticker fastened inside the windshield to use his (discounted) commuter ticket. The sticker was supposed to be permanently attached by peeling off the clear outer layer and exposing the adhesive. This fellow left the outer clear protective layer intact and placed a drop or two of mineral oil or baby oil on the tag. It stayed in place when applied and was very easily removed.For those who need to attach a permanent sticker to the inside of a glass surface, but are concerned about getting it off later, you might wish to try this. The layer covering the adhesive will have to be transparent for this method to work.
Do you think I should buy the extended warranty on my BMW?
i would use a razor blade and use WD-40 on the adhesive. it works on taking that taping stuff for window shades for trucks and other stuff off pretty well. for a sticker its just best to try to get it wet if possible and just use the straight razor. hopefully that works.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.