Question:
i was changing my differential fluid and i accidentally broke a bolt in the carrier/cover area, it leaks like hell. how can i fix it?
Answers:
Transmission Problems With A 1995 Chevy Blazer?
Buy an "easy-out" kit with drill bits.Follow instructions.
Or, left handed drill bit. Bring one of the non-broken bolts with you to match up a drill bit a tad smaller than the bolt diamiter.
Fuel injectors, coil packs, 98 cavalier...oh my!?
And a drill.
And a new gasket.
and a new bolt to replace the broken one.
And a center punch.
And a hammer.
And a magnet to get the drilled debris from the bottom of the pumpkin.
And a can of brake cleaner
and some more oil.
And an extension cord.
And a drop light to see in the dark.
Looking for the fireing order for grand marquis?
i own a shop,and you,ll have to drill a small hole in it get an easy out ,and remove it,it might not be to easy to do ,but that the only thing you can do for it there are no other fixes for this kind of a problem,good luck hope this helps.Drill then use a bolt extracter (easy out)
Make sure the drill bit is correct size by holding the bolt extracter up against the bit.
The threads should be showing while the drill bit is covered by the extacter shank.
It'll take some time but look at it as a lesson learned. G.Luck!
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.