Question:
I have a 1994 Nissan Maxima. There is a noise when I turn right, but never when I turn left. It kinda sounds like a clicking noise or like if I am running over an aluminum can almost. If I turn slow or wide, I won't hear it, but if I turn fast or narrow, I hear the noise.
I replaced the rack unit because it had a leak, which got rid of the grinding noise, but not this noise.
I thought maybe it could be the cv joints, so I took it to a mechanic. They said the cv boots were fine, but that the right axle was broken, so I replaced it. When I got it fixed, at first I didn't hear the noise (maybe I only made soft turns), but right afterwards I began to hear the same noise as before I took it in. It has plenty of fluid, so it's not that either. What do you guys think it could it be?
Answers:
What is wrong if there is a humming sound coming from the front wheels?
outer tie rod end sound like some of the problem have ur front end checked out again it could be that or inner tie rod endThe worst car you have ever owned?
cv joint no questions asked but i could be the other side. or and this does happen in garages they lied and did not change it but if you got the old part then you would know.does anyone know how to bleed the brakes on a 1991 buick lesabre?
How about the wheel bearing. At that high angle of torque, a bearing in the wheel would squeal. This bearing could have been replaced with the new axle. These bearing are in the hub, right behind the disk. You will have to remove the brake caliper and disk.can new tires affect gas mileage?
I would suspect a CV joint. Just because the CV boot is okay doesn't mean the joint itself isn't bad.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.