Question:
how should clutch feel after replacement? should the friction point change any? wondering if i got screwed over
Answers:
My car horn only works some of the time - any ideas?
The point where you feel the contact with the clutch can change quite a bit after changing the clutch, usually it contacts higher on the throw than previously.This is due to thicker material on the surfaces, and the pedal may need to be adjusted after the change.
With a mechanical linkage this is pretty easy, but most hydraulic clutches are a little more involved.
it all depends on the vehicle and who did it but if you r unsure the work has been done have a look at the gearbox bell housing bolts if they havnt been undone the the box hasnt been off and you cant do the cluth without taking it off
has the biting point changed on the pedal ?
did they show you the old clutch?
have the faults that lead you to belive it needed changing gone?
Any one know about EGR valves going bad & what your car acts like.?
Depending on how it is adjusted, yes it would change. Some engage at the low point of the pedal release, some at the upper end. Do you have a cable, or is it a hydraulic clutch? I would not worry about it. I am sure that all is well. And if you are still worried, ask the mechanic that did work. No one needs a mad customer. He will do what he can to make you happy. I would, I don't need people bad mouthing me all over town.My 1997 Honda Accord is having problems lately. Can someone help me understand why?
well you didnt say if your clutch is hydraulic or mech lin kage type.most new clutchs will grabb much closer to the floor and be much easier to push than before.its normal and in a matter of a day or so you will get readjusted to it.
clutches have a tendancy to go bad gradually till they just fail.we dont aqlways notice the changes till we get a new one,then you have to learn how to drive all over it seems
provided your not having any other problems it will be ok
how much is an alternator in uk pounds?
if You are concern about how should feel then You did not screw it.at first :will not grab too good,after one day of usage and pass the "burnishing" process. You will be fine
How can you reattach the cloth covering on the inside roof of a car?
If your not sure, have it inspected by another auto technician.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.