Question:
I have a '97 Grand Prix with a 3800 V-6. There is a single bolt on the left side of the water pump that is directly behind the power steering pump pulley. How do you get the PS pump pulley off? I pulled a tricep trying to get this thing loose, and I'm no further now than when I started on it. Can anybody give me a tip on removing the pulley or the whole PS pump? I have a brand new water pump that I can't get on because of this fine piece of design by the brilliant engineers at GM!
Answers:
FusesThat Control Windows, Locks For A 1996 PONTIAC BONNEVILLE?
you dont have to pull the power steeing pulley off...There three holes in the power steering pulley that allow access to two or possible three bolt that hold the pump to the bracket...Remove the belt, then get a deep either 13 mm or 10 mm socket and place it in one of the holes in the pulley...you will find that when you remove the bolts, the pump will slide out of the way.
Do not remove any powersteeing lines or any other item from the power steering pump..You will only be causing yourself more work..
The brillant engineers at GM left you an out...All you have to do is look...ha ha
What are the steps for schedule maintenance on a 2005 Ford Focus ZX3?
here is a step by step on how to re move the pump is a lot easier than tring to pull off the pulley plus it will not come off when it on the engine there is no room for thr puller.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.