Question:
Rear axle housing I D's rear end as Fairmont or Zepher I guessing 1979. It has a 4 lug bolt pattern and I want a 5 lug bolt. What axles will interchange?
Thanks
Harv
Answers:
I am 99.5% sure that all of the Fairmonts and Zephyrs came with the 7.5" rear axle. I have not tried it, but if the Mustang is the same width (the 79-93 Mustangs were based off of the 78 Fairmont) then any aftermarket axle that would go in a Mustang housing should work. You need to verify if the Fairmont axles are the same width as the Mustang ones.
1990 f150 auto transmiission woes please help.?
If it is a 7.5", personally, I would try to find an 8.8 out of a Mustang and put the entire rear-end into your car. then upgrade to aftermarket five lug axles. Of course this is not a necessity unless you are running a high horsepower motor.
What brand of fuel injector cleaner actually works?
Good luck!
Do Pinto Camshaft Timing Gears wear out?
bottom line...any.five bolts, most common ,vans and trucks.
How to change oil in a 96 jeep grand cherokee and how to replace a rear tail light as well.?
should be Ford
My car makes a zinging sound when I switch the overdrive button off on my car,but not always?
Here's the problem, you need to check to see which rear end you have. It could be a spicer 7.5" or 8.8" or the Ford 8" or 9". The 7.5/8.8 have a cover that bolts over the rear of the gear housing, the 8"/9" the chunk comes out the front. I'm guessing you've got the 7.5/8.8 so you will need to find a suitable v-8 donor with the same axle type. Good luck.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.