Question:
after i replace the 7440 normal bulb with the LED bulb. My signal blink faster when i turn the signal but it blink normal when i turn the emergency light. is it ok to keep it or something wrong with it?
Answers:
My car shakes and won't accelerate...help!?
You have less resistance going to the LED bulb than you did with your normal bulb that is why it is blinking so fast. But check and make sure that all your lights work if you have one out it will make it blink faster. When you have your 4 ways on you have enough resistance for it to blink normally. But if all the lights work I wouldn't worry too much.Why is my 1999 Pontiac Grand AM still running hot?
it sounds like a wiring problem.open the trunk and check the wires to the light.this happened to me,it was a loose wireAnyone own an oldsmobile bravada and have mechanics knowledge?
The resistance of the bulb is different. You need an electronic flasher (the timing is controlled by circutry instead if resistance+heat). But faster means less resistance, so be sure you have the correct bulb, and haven't created a short circut.My friend Rican needs help from a good mech. concerning her 98 Geo Metro?
If you want it to blink fast, that's cool too.
What can be wrong with an 04 cavalier if there is a miss in the fourth cylinder?
The electronic flasher plugs into the same place the original came from, and is available for $10 at auto parts stores.
chances are thatit is too powerful or you may need a bigger fuse to run it .. could also be that its ready to burn out.. but if you just replaced it Im not too sure try the fuse thing.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.