Question:
Its a 1998 S reg 1.4 petrol model. What does the idle control valve look like, how can I remove it and how should i clean it and put it back?
Answers:
How much would it cost to get a bumper painted.?
ON YOUR CARB SCREW IN ONE AND A HALF TURNSford f250 4x4 diesel 1973 (south africa)?
hi...go to this site, and do a search for your car type and problemhow can i get a high pitch sound from my muffler, like a motorcycle. i have a 06 cobalt?
http://tech.bentleypublishers.com/forum....
this should help you
how much would it cost to get an 1994 integra painted tangerine orange?
My golf has a weird little foible.Sometimes, for no apparent reason it will not tick over and keeps stalling. What I do is put some more tension on the throttle cable. Have a look at the cable set up in the engine compartment. Pull out the metal clip locating the cable, pull the cable through some more and refit the clip.Check the tick-over speed on the tacho and adjust again to suit if necessary.Have a '97 Jeep GC Laredo that has a hard time shifting from 3rd gear into 4th.?
The idle valve is built into the throttle body where the cable joins to it.This is non removable if you unplug it will need resetting using diagnostic equipment.You cannot clean or inspect. You can identify throttle body it has a D shaped plug with 8 terminals.If there is a problem get it checked using diagnostic computer equipment
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.