Question:
Im not sure where it is located or how to get to it
Answers:
why won't my 91 buick skylark start when it is cold?
it's on top of the intake.... follow the upper radiator hose to the motor block, it will set right where the hose connects to the motor block. The hose neck connection covers the thermostat. 2 bolts should lift the hose neck to reveal the thermostat.Hope this helps..... Good Luck =)
changing starter on '93 S10 4.3 4X4...can't remove, too tight!?
Raise the hood and follow the upper radiator hose, that is where the thermostat is. Depends on whats in its way for you to move out the way, then change.if you,ll follow the top radiator hose down,,to the housing ,the thermostat is in under that housing,,you,ll need to drain off some of the anti freeze from it ,other wise it will run out on you ,,about a gallon will be enough to drain off of it,,then remove the housing,and clean the old gasket off of it,,and replace the thermostat,,don't over tighten the bolts that hold the housing on,,it will crack if you over-tighten it,,fill it back up,and your done,,check it good for leaks,,and that should be it,,good luck with it,,hope this help,s.,,happy new years also.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.