How do you change the front wheels bearings on a 2004 Grand Prix ?

Question:
I've changed the front wheel bearings on my front drive rabbit but wonder if it isn't easier on a GP. Are the bearings attached via a flange around the perimeter of the bearing ? Do they need to be pressed out and new ones pressed in ?

What was the stock motor on a 1966 Dodge Coronet?


Thanks,

Answers:

Tuned up cars, cool?

Its a sealed hub/bearing assembly. The entire hub is replaced as a unit.

Where to buy trunk lid extension?


Remove the wheel and tire, remove the brake caliper and rotor, remove the CV axle nut, disconnect the ABS sensor wire, un-bolt the hub assembly from the back, attach slide hammer to front of hub assembly and whack away. Disconnecting the ball joint may give you more room to play. Installation is of course the reverse (without the slide hammer).

How do you check the oil pressure in a truck?


ASE Certified Automotive Service Advisor.

2001 Honda Civic 4 cyl.?

No they do not need pressed, they are a sealed bearing unit. There are retaining bolts around a flange, I believe there are three of them. Once you buy the bearings at the parts store you will see what I am talking about. It's an entire hub assembly with the bearing and lugs, etc. Take your caliper, caliper bracket, rotor, and axle nut off. The axle will will slide out of the splined hub, and then you simply unbolt it and unplug ABS if applicable. Its not hard to do at all, I've done a lot of them at work, I'm a mechanic. Good Luck!

Whats wrong with my car?

You'll need to take the rotor and caliper off to be sure. If there are fasteners, then you're in business, otherwise the knuckles will have to be pulled off and the old bearing pressed out at a machine shop.
More Questions & Answers ...

  • 1999 Sunfire questions . tool sizes?
  • It's possible that a gasoline engine fonction without a spark?
  • Toxic fume monitoring warning light?
  • What is the right amp for a radio fuse (Honda CRV, Year 2000)?
  • Whats wrong with my minivan?
  • Any idea whats wrong with my oldsmobile alero?
  • Some times wen i turn my car off n then try to turn it back on it wont start why?
  • How can I install my car's window regulator?
  • Replace gas tank 1985 chevy truck?
  • Where can I find euro headlights and tail lights for an Oldmosbile Alero?
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.