Question:
Answers:
My car heating system is broken? Help!!?
The Dodge man was right. Get a Haynes repair manual at Auto Zone for $15. It will walk you through the process step by step.You'll need: Basic socket set / metric
snap ring pliers
slide hammer and gear puller
jack stands
and a rather large breaker bar
you'll also need a large socket that you can borrow from Auto Zone for free with a deposit.
Depending on the vehicle you may have to pull the axle shaft, which means disassembling the carrier in the rear diff.
If this sounds to complicated, pay someone.
The manual is the most important part, and should be the first thing purchased. It will help you to determine if you can even pull this job off.
Good luck.
2002 CHEV 1ton diesel pickup fuel gage inop back/tank won't drain into front tank?
Stop reposting the same question over and over!1995 CHEV DIESEL PICKUP fuel problems?
You got two responses on the original post!
Mass Air Flow Meter for 2000 Toyota Corolla?
here is the link
Problem with 49cc ATV Quad. Idles ok, stalls when accelerating.?
http://answers.yahoo.com/question/index;...
what size and type of fittings do i need to connect the transmission cooler lines to the radiator?
I'm guessing you are wanting to replace the wheel bearing and not the hub? The hub and bearing need to be pressed apart and then back together. You'll need a hydraulic press for this. This job is best left to a professional.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.