Question:
Answers:
Is it possible to put power steering on a citroen saxo 1.0i, t plate?
Dodge man is correct although I believe he is a little shy on the pricing though, or he may be able to do them cheaper...lolWhat should you do or what is happening if your car is leaking coolant?
Average prices in TN. are $20-25.00 for the wheel cylinder and about $50-75.00 per hour in labor depending where you go, either a dealer($75-85.00) or a small shop($50-75.00).
How to take the serpentine belt off of a Buick?
Also being as you are replacing one wheel cylinder it is also recommended that you replace both due to worn seals on one cylinder and new seals on another, equalize them by replacing them both. Necessary...no, recommended...yes.
Good luck and hope this helps.
Where is the battery located on a mercedes a140 car?
They are not that expensive. Depending on the car, about $20 or so.Hi,my 2.9 ford has 2 new heads and gasket but still it send combustion gaze into the cooling system?
Depends on the type of vehicle you have. Can cost as low as $10 to as much as $50.i own a shop and a new one is only around 10-20 bucks,but the labor for putting it on,and bleeding the brakes back out real good,will probably run around 25.00 bucks or more,you can figure at least 75 bucks on this one to be safe about it,it might actually be less,it all depends on how long it takes to do this,i usually charge around 25 bucks strait out for this,and it can take at least an hour or more to do it,good luck with it,I'm glad you decided to get it fixed,hope this helps.
I'm buying a Brake caliper for my car. Whats the difference between a loaded and unloaded caliper?
Wheel cylinder $4.00 dollars.Labor $260.00 dollars.
I have a 99 Ranger w/ 81K, and the windshield wipers turn on by themselves...?
I am not kidding.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.